Results 1 to 8 of 8

Thread: SB2 Headers

  1. #1
    Junior Member APPRENTICE
    Join Date
    Feb 2005
    Posts
    20

    SB2 Headers

    Will headers for Sb2.2 heads fit on 1st generation SB2 heads?

  2. #2
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    635
    Unless you are stuck with them, DON'T buy the old SB2's. Unless you get them complete with everything with spares, buying stuff for it will get real expensive. There is a set on ebay 559 castings, no valvetrain. Header flanges look the same as mine. The 011 2.2 castings are what you want to find.
    Mark Whitener
    http://racingfuelsystems.myfunforum.org
    __________

    Good work isn't cheap, and cheap work can't be good.

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Location
    Rutherfordton North Carolina
    Posts
    192
    Not to mention the sb2 heads don't make any power.Bill
    Hendrens Racing Engines
    1310 U.S. Hwy 221 North
    Rutherfordton N.C. 28139
    828-286-0780 Bill, Steve, Mike
    www.hendrensracingengines.com

  4. #4
    Junior Member APPRENTICE
    Join Date
    Feb 2005
    Posts
    20
    I have a complete engine. I need headers and was wondering if headers were interchangable between the two. Thanks for the input, your right this thing is very expensive.

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Location
    Rutherfordton North Carolina
    Posts
    192
    I am 99% sure they will interchange,haven't seen any of those heads in 12 years. Rocker gear is impossible to find.Bill
    Hendrens Racing Engines
    1310 U.S. Hwy 221 North
    Rutherfordton N.C. 28139
    828-286-0780 Bill, Steve, Mike
    www.hendrensracingengines.com

  6. #6
    Junior Member APPRENTICE
    Join Date
    Feb 2005
    Posts
    20
    I found a header builder (Lemons Headers) here in California. I had rockers built by T&D. Parts are expensive. I have too much invested to back out now. Engine will be complete as soon as headers are done approx. 6 weeks.
    Thanks for the help guys!

  7. #7
    Junior Member APPRENTICE
    Join Date
    Feb 2005
    Posts
    20
    I was able to have a set of shaft rockers made up by TD Machine. Really high quality work (along with the price). I should be getting my haeders in about 3 weeks, can't wait to try this thing out!

  8. #8
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    635
    Let us know how it works, I love my 2.2 and I'm just getting started.
    Mark Whitener
    http://racingfuelsystems.myfunforum.org
    __________

    Good work isn't cheap, and cheap work can't be good.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy