Can heads be too Big
#1
Member
JOURNEYMAN
Thread Starter
Join Date: Nov 2005
Location: Baltimore
Posts: 30
Can heads be too Big
This was just an information Question. Some of the Head manufactors
web site quote compression ratios for there heads . Lets say 632 cu
10-1 compression 714-750 cam shaft soild roller. cam 360 head or bigger be too much.
web site quote compression ratios for there heads . Lets say 632 cu
10-1 compression 714-750 cam shaft soild roller. cam 360 head or bigger be too much.
#3
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Re: Can heads be too Big
Originally Posted by blaserman
This was just an information Question. Some of the Head manufactors
web site quote compression ratios for there heads . Lets say 632 cu
10-1 compression 714-750 cam shaft soild roller. cam 360 head or bigger be too much.
web site quote compression ratios for there heads . Lets say 632 cu
10-1 compression 714-750 cam shaft soild roller. cam 360 head or bigger be too much.
Really thought many disagree with me but myself and a few locals keep going back to a huge head on smaller motors and they just down right fly ! I've now did this 2 times 548 with dart 410's and 468 with dart 355's, a good friend of mine put dart 360's on his 496 all 3 motors really ran good better then anything around here with the same size motor and smaller head.
#4
Senior Member
EXPERT BUILDER
Join Date: Jun 2005
Location: potash country
Posts: 262
That being said,the carb and cam have to work together also.
Did you guys have to try different carbs and cams with the low compression,big heads and big cubes to make things work together :?: Was there a fine point(small window) for the carb and cam :?:
Did you guys have to try different carbs and cams with the low compression,big heads and big cubes to make things work together :?: Was there a fine point(small window) for the carb and cam :?:
#5
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Originally Posted by Tod74
yes heads can be too big....helmets only come in so many sizes.
#6
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by nofear69
That being said,the carb and cam have to work together also.
Did you guys have to try different carbs and cams with the low compression,big heads and big cubes to make things work together :?: Was there a fine point(small window) for the carb and cam :?:
Did you guys have to try different carbs and cams with the low compression,big heads and big cubes to make things work together :?: Was there a fine point(small window) for the carb and cam :?:
#7
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Originally Posted by olds48
Originally Posted by Tod74
yes heads can be too big....helmets only come in so many sizes.
#8
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Originally Posted by Tod74
Originally Posted by olds48
Originally Posted by Tod74
yes heads can be too big....helmets only come in so many sizes.