THANKS ED!
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Sep 2003
Posts: 259
THANKS ED!
[quote="edvancedengines"]With the best quality Ti-17 Professional Grade Retainrs the retainer OD is smaller than the spring OD. There is no reason for the retainer to be as large or larger than the spring.} Thanks Ed-I replaced my Manley Titanium retainers with a set of Xceldyne Titanium retainers that fit snug in the springs and are smaller then the spring OD,chambered the springs,clearanced the rockers to remove the rubbing marks and now the rockers have NO marks on them after several 1/4 mile passes.
#3
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Sep 2003
Posts: 259
nofear69: My camaro weighs 3100,383,13-1,.558 int,.550 ex,260,[email protected] comp flat tappet,stock 215 Dart Iron Eagle Platinums,Manley 6 inch rods,Super Victor port matched,750 APD Alky Carb,Powerglide Trans-Car ran 6.57@104 at the track in the pic,1/8 MILE
#4
Senior Member
EXPERT BUILDER
Join Date: Jun 2005
Location: potash country
Posts: 262
Perfect I love the nothing over kill combos.
Small cubes,carb,cam and heads but good compression with alcohol. This should be a bullet proof low maintenace engine,everything works together. You did your home work,cool 8) and the small tires give it that sleeper look. Loose a little weight and the 5's aren't to far away. My hats off to you,great 67' Camaro
Small cubes,carb,cam and heads but good compression with alcohol. This should be a bullet proof low maintenace engine,everything works together. You did your home work,cool 8) and the small tires give it that sleeper look. Loose a little weight and the 5's aren't to far away. My hats off to you,great 67' Camaro