oil pump spring
04-19-2008, 06:46 PM
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Dec 2005
Location: alberta,canada
Posts: 166
oil pump spring
Hi guys i did a search but couldn't find anything on this, i am changing my spring in my oil pump to a high pressure one, i noticed that in the pump it only has one hole so makes it kinda tricky to get the pin out, is there any easy way to get this out or a diffrent way instead of cutting it to get it out.
thanks
04-19-2008, 07:01 PM
Member
JUNIOR BUILDER
Join Date: Jul 2003
Location: U.S.A.
Posts: 80
take the cover off then you can remove the pin.
04-19-2008, 07:20 PM
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Dec 2005
Location: alberta,canada
Posts: 166
Quote:
Originally Posted by dcarr511
take the cover off then you can remove the pin.
shit i have the pickup already pressed into the oil pump
04-20-2008, 03:46 AM
Member
JUNIOR BUILDER
Join Date: Jan 2004
Location: Wisconsin
Posts: 65
oil pump
Just a good idea to weld the pick up onto the pump. When you change the spring. The Moroso billet pump has adjustable pressure settings for $100.00
JMT
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off