Results 1 to 4 of 4

Thread: oil pump spring

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Location
    alberta,canada
    Posts
    166

    oil pump spring

    Hi guys i did a search but couldn't find anything on this, i am changing my spring in my oil pump to a high pressure one, i noticed that in the pump it only has one hole so makes it kinda tricky to get the pin out, is there any easy way to get this out or a diffrent way instead of cutting it to get it out.

    thanks

  2. #2
    Member JUNIOR BUILDER
    Join Date
    Jul 2003
    Location
    U.S.A.
    Posts
    80
    take the cover off then you can remove the pin.

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Location
    alberta,canada
    Posts
    166
    Quote Originally Posted by dcarr511
    take the cover off then you can remove the pin.
    shit i have the pickup already pressed into the oil pump

  4. #4
    Member JUNIOR BUILDER
    Join Date
    Jan 2004
    Location
    Wisconsin
    Posts
    65

    oil pump

    Just a good idea to weld the pick up onto the pump. When you change the spring. The Moroso billet pump has adjustable pressure settings for $100.00

    JMT

  5. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy