torque converter install problem
#1
Senior Member
DYNO TECH
Thread Starter
Join Date: Aug 2007
Location: Colebrook Connecticut
Posts: 425
torque converter install problem
installed my new TCI torque converter today .
I got the triple thud as the splines engaged.
measured the distance from bellhousing to converter pads and it was good.
gear selector in neutral but converter doesnt spin freely as per TCI instructions?
spins one way ok but not the other way?
I got the triple thud as the splines engaged.
measured the distance from bellhousing to converter pads and it was good.
gear selector in neutral but converter doesnt spin freely as per TCI instructions?
spins one way ok but not the other way?