Can You Make A Dominator 1050 Work On The Street ?
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Feb 2004
Location: michigan
Posts: 7
Can You Make A Dominator 1050 Work On The Street ?
Can You Make A Dominator 1050 Work On The Street ?
I have a 340 W5 heads,roller cam 715,718 lift,11.5cr.
727 trans,4800 stall,513 gear.
thanks
I have a 340 W5 heads,roller cam 715,718 lift,11.5cr.
727 trans,4800 stall,513 gear.
thanks
#2
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Ran one on the street for a little while.496 BBC 11:1 comp 652 solid roller with 308 duration and a 4000 stall.4.88 gears.Worked fine. Just another carb,if you ask me.As long as it's not too big for your engine(which I don't think it is),should be fine
#3
Member
MASTER JOURNEYMAN
Join Date: Apr 2005
Posts: 41
there not bad to work with on the street i would deffinetly recomend running a power valve in the front to help clean up the primarys. we run 4500s here on the street with out any problems we also use the three circut dominator that way you can play with the mid cicrut and air bleeds. hope this helps
#5
Member
JUNIOR BUILDER
Join Date: Jul 2003
Location: U.S.A.
Posts: 80
Re: Can You Make A Dominator 1050 Work On The Street ?
Originally Posted by 71duster
Can You Make A Dominator 1050 Work On The Street ?
I have a 340 W5 heads,roller cam 715,718 lift,11.5cr.
727 trans,4800 stall,513 gear.
thanks
I have a 340 W5 heads,roller cam 715,718 lift,11.5cr.
727 trans,4800 stall,513 gear.
thanks