heads & piston
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Jan 2008
Location: sydney ausralia
Posts: 17
heads & piston
hi guys just woundering if anyone has done this exercize .
i have a 414 sbc with 23deg heads , im thinking of changing to a set of 15deg or 12deg . can i get away with yousing the same piston its a JE with an 11cc dome ?
cheers chris
i have a 414 sbc with 23deg heads , im thinking of changing to a set of 15deg or 12deg . can i get away with yousing the same piston its a JE with an 11cc dome ?
cheers chris
#3
Junior Member
APPRENTICE
Thread Starter
Join Date: Jan 2008
Location: sydney ausralia
Posts: 17
Originally Posted by edvancedengines
Yes you can.
The valve notches on the pistons will need to be compltely redone though.
Ed
The valve notches on the pistons will need to be compltely redone though.
Ed