E.T.s

Old 02-19-2008, 06:39 AM
  #1  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default E.T.s

OK folks, I have what may very well be a dumb ??? My little altered seems to run anywhere from 5-15 m.p.h. slower than other cars running the same E.T. I donot understand why this is. The car normally runs 60 ft times in the 1.30s,and is pretty consistant. Hilborn stack injected 406 SBC with a glide that I footbrake.
suicidebomb is offline  
Old 02-19-2008, 07:14 AM
  #2  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

Does it run out of motor on top? maybe too much gear?
Tod74 is offline  
Old 02-19-2008, 07:20 AM
  #3  
v8Fiero
Senior Member
MASTER BUILDER
 
Join Date: Nov 2007
Location: Wisconsin cheesehead!!
Posts: 213
Default

could be a variety of things, what ets are your running?

you could be launching harder then the others,
too small of a carb,
too small exhaust,
ignition isnt timed all the way, keep running passes slowly bumping the timing up until you hit your fastest mph then you have the perfect timing for your combination.
you could have a torquier cam, a lower rpm powerband when others in your class have higher.
to much spoiler if you have one
to much gear like Tod said
etc....
v8Fiero is offline  
Old 02-19-2008, 12:27 PM
  #4  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

E.T.s are mid-nines, stack injection N/A on methanol. 1 7/8 zoomies. Ign-magneto 38 degrees total adv. cam- flat tappet solid .525 lift 290 adv. no spoiler or wing of any kind. 4.11 gear. thanks
suicidebomb is offline  
Old 02-19-2008, 12:30 PM
  #5  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

OH, i forgot it turns on the shift light in the traps.
suicidebomb is offline  
Old 02-19-2008, 01:27 PM
  #6  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by suicidebomb
E.T.s are mid-nines, stack injection N/A on methanol. 1 7/8 zoomies. Ign-magneto 38 degrees total adv. cam- flat tappet solid .525 lift 290 adv. no spoiler or wing of any kind. 4.11 gear. thanks
Cam is way too small, i run .668 roller in my 377" and when it was a flat tappet it was a .597 with a 406", 38 degrees is alright maybe a little high for a light car, you didn't say what size tire but you shouldn't be running out of rpm in the lights. Header size is o'k but zoomies do not performe as well as a good set of headers, even on stacks injection, blowers yes.

JMO

Zip.
zipper06 is offline  
Old 02-19-2008, 03:24 PM
  #7  
shawnp
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Ohio
Posts: 936
Default

Zipper is correct. There are some variables. I would guess you are running a glide. Where are you shifting at? Also, with injection, you will see a quicker 60 foot and ET due to the response of the injection. We ran enderle hat injection for several years. Saw 3-4 mph pickup going back to a carb but lost .15-.20 ET. Wide open our dragster ran 8.0's-7.90's at 170mph with 60 foot times at 1.15-1.16. Running a high gear set up( shifting the car at 0.10) we would run 8.60's at 168mph with 60 foot times of 1.40-1.42.
shawnp is offline  
Old 02-19-2008, 04:08 PM
  #8  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

The tires are 33s. I am running a powerglide. Shift at 6500. I have been looking at a lunati roller, 630 something lift, and i forget the duration but it was a lot, 330 maybe but I forget. Any suggestions? What about headers, collector length etc. I hate to lose the zoomies, they look cool, and they sound gooood! But I will for a good cause, What about piston to valve clearence, Im running wisecos with i think .250 dome. If you need more info, ask and ye shall receive. thanks.
suicidebomb is offline  
Old 02-19-2008, 04:14 PM
  #9  
shawnp
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Ohio
Posts: 936
Default

Try your shift point at 6800. That may bring your trap RPM down with your set up. I just don't think you are going to see a sbc bring the same mph that you will other cars running same ET's with BBC. That has always been 1 of the complaints of a few friends running sbc in their diggers.
shawnp is offline  
Old 02-19-2008, 04:30 PM
  #10  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
Default

I donot really want to go a bunch faster anyway. 8.90s would tickle me till I curled my toes. My wife might want to pick a fight, much faster than that. Or maybe i AM just yellow. A man has to know his limitations!
suicidebomb is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -