drive line angle help!
#4
Senior Member
MASTER BUILDER
Join Date: Dec 2003
Posts: 185
You need neg 2 deg of pinion angle.. Now this is with the car on it's wheels and race ready.. You adjust with the left upper bar only. Make sure that the right upper bar is out or keep it neutral or loose. As you change the pinion angle with the left upper bar the right upper is going to get tight so you will have to loosen it every time you turn the left bar...Get it :mrgreen:
#6
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
The engine needs to be leveled first or as close to level as possible, -1 would be ok. What I do is take the carb off and use the carb flange as a plane and set a small bubble level on it and level the motor. I bet someone has either fabbed up a tranny crossmember that sits to low or you have the incorrect OEM peice for the motor tranny combo you have.
Goodluck, Charles
Goodluck, Charles
#7
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044