Looking for roll cage builder in Kansas.
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jan 2008
Posts: 1
Looking for roll cage builder in Kansas.
I live in Central Kansas, and the closest chassis builder that i can find is Doug Crumbliss Racing in Baxter Springs Ks. They do awsome work , but it's like a 6 hour drive from where i live. So any input on chassis builders in ks would be greatly appreciated.
I am building a 1985 Camaro for drag racing purposes, so the cage would have to pass NHRA tech.... THANKS FOR YOUR HELP!!! :lol:
Josh
I am building a 1985 Camaro for drag racing purposes, so the cage would have to pass NHRA tech.... THANKS FOR YOUR HELP!!! :lol:
Josh
#4
Junior Member
SHOW GUEST
Join Date: Apr 2006
Posts: 1
There is also another group of guys that are in Wichita. RPM Motorsports. Holzman is good but pricey and takes forever. One of my buddies had them do their baby; roll cage, backhalved, rear end, and suspension. Looks good but if your wanting to drive it this year I'd look more into the RPM guys.
#5
Junior Member
SHOW GUEST
Join Date: Sep 2003
Posts: 2
RPM Motorsports
4129 West Pawnee
Wichita, Kansas
1 316 259 4585
Best to drop by and visit with Bob, He will take the time to sit and talk about what you want done.
You will get what you want built, not what they want to give you.
4129 West Pawnee
Wichita, Kansas
1 316 259 4585
Best to drop by and visit with Bob, He will take the time to sit and talk about what you want done.
You will get what you want built, not what they want to give you.