Chevy flexplate question....
01-21-2008, 01:29 PM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jul 2004
Posts: 2
Chevy flexplate question....
Question... I have a (est) 500 hp or so 406 SBC that will not see NOS or a transbrake, will the low dollar SFI flex plates do the job or should I spend a little more on something from ATI or JW? Thanks... A
01-21-2008, 01:37 PM
#2
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
I was running 6.90s in the 1/8 in a 3400 pound car(driver included)with 1.60 60's,with a stock flexplate.Est. about 625-650 hp.I put in a tci plate for peace of mind,but don't think you'll have a problem breaking any of them with your power level.Of course,if you over build now you'll be ready to go when you build that alky injected 540 
.Safety first.You only have one set of toes!!
.Safety first.You only have one set of toes!!
