Connecting rod ?
#7
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Oliver
OLIVER!
They dont mind Charing for there OVER PRICED SHIT!
I have a Nice set of Billet 6.635 BBC Rods,1830.00 with the Bolt Upgrade.I sell them CHEAP!
But,heres the Deal,6 are Useable and 2 are JUNK!After 2 Passes.1 of them let go of the Bearing for an Unknown Reason?They will Sell me two more though???
Later
G
They dont mind Charing for there OVER PRICED SHIT!
I have a Nice set of Billet 6.635 BBC Rods,1830.00 with the Bolt Upgrade.I sell them CHEAP!
But,heres the Deal,6 are Useable and 2 are JUNK!After 2 Passes.1 of them let go of the Bearing for an Unknown Reason?They will Sell me two more though???
Later
G
#9
Senior Member
MASTER BUILDER
Join Date: Dec 2005
Location: Rutherfordton North Carolina
Posts: 192
Oliver makes a 6.635 rod that will easily handle that power level,we have several engines making over 2000 with that rod and no problems in 4 years . you will need to deck your block to get the correct deck height. we also use Crower billet rod for that application. H beam rods are not as good because the beam thickness doesn't give you enough side to side strength.Bill Bill
#10
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Originally Posted by hammertime
I wouldnt buy oliver seems they like to break a lot.. Ive got pics to prove it !
Carrillo is a good rod, just make sure you get the good rod bolts and check the HP rating.
Carrillo is a good rod, just make sure you get the good rod bolts and check the HP rating.