Results 1 to 3 of 3

Thread: fuel pump rod for roller

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Montvale, VA
    Posts
    1,431

    fuel pump rod for roller

    I have a GMPP crate motor.It's a Fastburn 385.It's got a steel roller cam in it.It came with a distributor that had the bronze gear on it,my question is about the fuel pump rod for the mechanical fuel pump.Does it need to be made of a certain material(bronze?)so as to not wear out something.I can find no info anywhere,and the "tech"at the dealership I bought the engine from,didn't know what a bronze gear was.
    "The problem with quotes on the Internet is that you cannot confirm their validity"- Abraham Lincoln

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Location
    Fountain,MICHIGAN
    Posts
    856

    Rod

    I would also put a Bronze Tipped Fuel-Pump Pushrod in the Motor!You can get them at just about any HP Outlet?I buy alot of Parts from Comp Products in Oshkosh Wi.
    Hope this Helps?
    Later
    G 8)

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Montvale, VA
    Posts
    1,431
    Cool.Thanks for info
    "The problem with quotes on the Internet is that you cannot confirm their validity"- Abraham Lincoln


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy