MSD ignition wire
12-20-2007, 05:34 PM
#1
Member
JOURNEYMAN
Thread Starter
Join Date: Sep 2004
Location: Galveston,Indiana
Posts: 33
MSD ignition wire
Switching from magneto to a MSD 7Al-2 ignition box. My question is how and where do I run my ignition wire off the MSD to the Painless control panel? Any help would be appreciated! Do I run it to the starter button or the ignition button on the panel! Thanks Mike :?:
12-20-2007, 10:16 PM
#2
Senior Member
MASTER BUILDER
Join Date: Oct 2004
Location: Newport News, VA
Posts: 139
Run the igntion wire to the ignition switch on the panel then to a 12v source. Run a separate wire from 12v to the starter button then to the neutral safety switch on your shifter then to the starter solenoid. You can go to MSD's website and download wiring diagrams.
George
George
12-20-2007, 10:42 PM
#3
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
