Results 1 to 2 of 2

Thread: offset pinion

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Montvale, VA
    Posts
    1,431

    offset pinion

    I can get a 9" housing from a buddy of mine for free.It is already narrowed and is the exact size I need.Pure luck.The thing is,it has a centered hogs head,which puts the pinion off to one side about 1-1.5".I was wondering what this would hurt,if anything.I'm concerned about u-joints busting,but mainly scared of snapping a tailshaft housing.What do ya'll think about aluminum center sections.I'm a Chevy guy lost in Ford's world of wierdness.HELP ME :?[img][/img]

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Oct 2004
    Location
    Newport News, VA
    Posts
    139
    Since you have basically the same post in the chassis section I am going to lock this one and ask that responders go to the chassis section. No need to crosspost in different sections.

    George
    http://www.gdmii.com/pics/81launchvidcapsig.jpg
    1981 Camaro @ 2594 lbs.
    496 cu. in. on 1150 Rupert alky
    Brodix BB2X heads touched by the magic hands of Curtis Boggs
    [email protected] Best 60' 1.18
    www.motorsportsvillage.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy