Results 1 to 1 of 1


  1. #1


    ok i need some help i am trying to do a v8 swap in a 95 stang i have everything done except for the wiring. i have an 86 302 with the wiring harness and computer from the 86 car. i can't figure out how to wire up the altenator ignition coil and starter. for some reason i get no jusice out of the ignition switch now. and there aren't any plugs for the ignition coil and altenator because they were tied into the 86's headlight harness. but i do have the plugs that are on the coil and altenator. i also disconnected the neautral safety switch but that didnt help the starter. also will i have to hardwire the fuel pump i think i read somewhere that i have to.
    one other question off the wiring topic.....what would be the best cam to getr for the 86 motor being there is not that much valve clearance? any help would be greatly appreciated...mike

  2. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy