Results 1 to 9 of 9

Thread: race flow development

  1. #1
    Member MASTER JOURNEYMAN
    Join Date
    Feb 2004
    Posts
    39

    race flow development

    has anyone on this site had any dealings good or bad with them rfd im looking to have a set of heads ported and i dont know of any reliable honest machine shops in my area looking to pick up around 3 to 4 tenths et thanks

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    Location
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    Posts
    540
    http://forums.racingjunk.com/viewtopic.php?t=4174

    Very very highly recommended by me and many builders and racers on www.yellowbullet.com

    Honest extreme high quality.

    Ed
    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Aug 2003
    Location
    Big Lake, Minnesota
    Posts
    162

    Re: race flow development

    Quote Originally Posted by denn468
    has anyone on this site had any dealings good or bad with them rfd im looking to have a set of heads ported and i dont know of any reliable honest machine shops in my area looking to pick up around 3 to 4 tenths et thanks
    You will not be disappointed at all!!!!

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Oct 2004
    Location
    Newport News, VA
    Posts
    139
    I've had plenty of dealings with Curtis Boggs of RFD. You won't find a better guy anywhere. I'd send him anything except my wife!

    George
    http://www.gdmii.com/pics/81launchvidcapsig.jpg
    1981 Camaro @ 2594 lbs.
    496 cu. in. on 1150 Rupert alky
    Brodix BB2X heads touched by the magic hands of Curtis Boggs
    [email protected] Best 60' 1.18
    www.motorsportsvillage.com

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Curtis you have a PM :lol:

  6. #6
    Member MASTER JOURNEYMAN
    Join Date
    Feb 2004
    Posts
    39
    thanks for the replys its just hard to spend a bunch of cash without really knowing if im going to get what i pay for again thanks

  7. #7
    I won't go anywhere else!!! That includes sonnys!!, He his a very good person to work with. There is a sticky tread on here also. Da' Man knows his stuff.
    http://i76.photobucket.com/albums/j4...a/c9e78afe.jpg
    522ci 1110HP 1803* Dukes, cast intake,1250 on gas. Heads By CBOGGS
    www.raceflowdevelopment.com

  8. #8
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    Location
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    Posts
    540
    More about Curtis Boggs RFD
    www.raceflowdevelopment.com

    1st.
    Search the internet and you will not find one person who talks bad about him, I am pretty certain. I have never seen any post from a dis-satisfied customer.


    I am getting ready to buy yet another set of his heads next week, the Monster 18 Deg Small Block Heads.

    For the dollar it is my very firm belief that there is not a better BB Chevy Conventional Head available as delievered than the RFD Ports in the Edlebrock Victor 24 deg casting. Same applies to what the throat work and the overall completed head looks like.

    I am 62 yo, and
    have been in this all my life. I have seen and at times used some of the best conventional and spread port heads that were available when they were new. That means I have seen a lot of used professional heads come through. I currently have in-house a pair of the best CNC Heads Brodix sells (the CNC KC PB 1200). Even compared to those and the quality of CNC Machine Work Brodix had Kieth Kraft Racing do, I am much more impressed with the quality of these Conventional Edlebrock RFD Curtis Boggs heads.

    No matter which head you desire, I suggest and recommend you to consult with Curtis Boggs at Race Flow Development (RFD) about what deal he can do for you. You will get better heads for the money.
    Curtis Buys bare castings from Edlebrock, Brodix, and Dart, and installs his own designed by him CNC Porting in them.

    Each ported set of heads will not be exactly the same as what I have here. These were tailered for the use we are building this for to use full 4 inch exhaust in a 3,500 lb car with 10.5 tires and a Powerglide. Someone elses will be made different. The horsepower range you are shooting for this one will do but will be capable of street driving to car shows.


    I hope it is ok with Curtis for me to post this. These numbers are read from the actual Flow Chart these heads tested. Exhaust ports were flow tested without any pipe attached. This is what you can get from Race Flow DEvelopment for the same money you would buy a production done shelf stock head from the others and you will still have to wait at least as long from them.

    380 cc Intake Runners;


    Intake
    .100 - 80
    .125 - 145
    .250 - 212
    .375 - 300
    .500 - 359
    .625 - 398
    .750 - 420
    .875 - 434.8
    1.00 - 440


    Exhaust
    .100 - 58
    .125 - 79
    .250 - 150
    .375 - 205
    .500 - 248
    .625 - 296
    .750 - 322
    .875 - 336
    1.00 - 337

    A couple of pics so you can see how free flowing these are. Look at the exhaust ports and understand why I am so impressed. Now go back and look at exhaust flow numbers.




    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.

  9. #9
    Senior Member DYNO OPERATOR
    Join Date
    Nov 2006
    Location
    NC
    Posts
    558
    MAN THEIR SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! David.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy