dyno program
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Dec 2005
Location: alberta,canada
Posts: 166
dyno program
does anybody have a dyno program, if i give them my specs on my motor built they can estimate the power............thanks i have tried dyno 2000 but it leaves way to many things out
#2
Senior Member
DYNO OPERATOR
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Fishman,
Send me in complte deatial all info about the car and the engine and tranny. Also send me the elavation, atmospheric pressure level, relative humitity, traction conditions, Kind of ignition, kind of hood scoop, kind of fuel pump, octane of gas used, Header sizes and if open headers or what size exhuast and muffler type. KInd of tires used, and the temp for the example you wish me to model for you.
This program's horsepower numbers are bogus but the ET and MPH are usually very close. This program also detects if any of your combination is completely wrong for the rest of the combination.
I can also model this in several other programs as well, but this one is more accurate.
With this one I have duplicated real existing cars.
Ed
PS;
Please send this by my email. My PM box stays filled up no matter how much I try to stay on top of it all.
[email protected]
Send me in complte deatial all info about the car and the engine and tranny. Also send me the elavation, atmospheric pressure level, relative humitity, traction conditions, Kind of ignition, kind of hood scoop, kind of fuel pump, octane of gas used, Header sizes and if open headers or what size exhuast and muffler type. KInd of tires used, and the temp for the example you wish me to model for you.
This program's horsepower numbers are bogus but the ET and MPH are usually very close. This program also detects if any of your combination is completely wrong for the rest of the combination.
I can also model this in several other programs as well, but this one is more accurate.
With this one I have duplicated real existing cars.
Ed
PS;
Please send this by my email. My PM box stays filled up no matter how much I try to stay on top of it all.
[email protected]
#4
Senior Member
DYNO OPERATOR
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Sorry.
I sometimes commit to more than I can do in timely manner.
Within the next day I will run this for you through 3 different programs.
Again, I apologize to you.
Ed
I sometimes commit to more than I can do in timely manner.
Within the next day I will run this for you through 3 different programs.
Again, I apologize to you.
Ed
#6
Administrator
RACING JUNKIE
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,204
Ed
Ed did you forget about me too?Where are them pics of the engine?I sent you an email last week,requesting them
Tom
Ed did you forget about me too?Where are them pics of the engine?I sent you an email last week,requesting them
Tom
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
#9
Administrator
RACING JUNKIE
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,204
Originally Posted by edvancedengines
I am getting old
No problem Ed.
On the bright side of things Ed don't leave the connecting rod bolts loose,like some professional engine builder did here last winter and his excuse to us was that we were back yard mechanics. :P
Now cut that out Ed I am not taking getting old for an excuse,you got to come up here with some thing better than that :P
Your still a very good friend to me Ed.But your not old.
Your getting soft and easy,on me :P
Love ya Ed your the best
Tom
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
#10
i new a mr. ed once!!!--WAIT A MINUTE / THAT WAS A HORSE :wink: :wink: :wink: ---YOU ARE ONLY AS OLD AS YOU FEEL-----I FEEL VERY, VERY OLD AT TIMES :x :x :x ---I DON'T FORG MUC AT AL---HELP!!!!!!!!!!!!!!!!!!!!!!!!