622CI ROTATOR
#1
Member
JOURNEYMAN
Thread Starter
Join Date: Apr 2007
Location: Australia
Posts: 32
622CI ROTATOR
G'day,
can any body help me with pricing on a BBC rotator?
4.75" crank
4.560" bore
6.7" rods
comp between 11 and 13 to 1
for street and strip
6500/7000rpm
1000hp
dart big m 119cc heads
merlin 111 block
has to be shiped to Albury Australia 2640, i have contacts with shipping containers.
rob
can any body help me with pricing on a BBC rotator?
4.75" crank
4.560" bore
6.7" rods
comp between 11 and 13 to 1
for street and strip
6500/7000rpm
1000hp
dart big m 119cc heads
merlin 111 block
has to be shiped to Albury Australia 2640, i have contacts with shipping containers.
rob
#3
Member
JOURNEYMAN
Thread Starter
Join Date: Apr 2007
Location: Australia
Posts: 32
after combinations and pricing, i have found some deals but im not getting good feed back :roll:
just after a reliable source and good deal, our dollar is heading for 1:1 with yours , a good time to buy.
just after a reliable source and good deal, our dollar is heading for 1:1 with yours , a good time to buy.
#6
Senior Member
DYNO OPERATOR
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
I apologize to you.
I will get back to you.
After I saw that recommendation for the Ohio Crank junk, that did it for me. That is the last company I would ever consider talking to again. They do have a few satisfied customers though.
https://speedtalk.com/forum/viewtopi...ght=ohio+crank
Ed
I will get back to you.
After I saw that recommendation for the Ohio Crank junk, that did it for me. That is the last company I would ever consider talking to again. They do have a few satisfied customers though.
https://speedtalk.com/forum/viewtopi...ght=ohio+crank
Ed
#9
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Buy callies compstar stuff its not bad
Certains builders wont use nothing but eagle some wont use eagle some wont use callies, some wont use oliver, some will use ohio and love it other swear at it. Everything breaks once in awhile it does happen.
I know a lot of eagle stuff is out there and not a lot breaks, ohio is a lot better then they used to be.
Certains builders wont use nothing but eagle some wont use eagle some wont use callies, some wont use oliver, some will use ohio and love it other swear at it. Everything breaks once in awhile it does happen.
I know a lot of eagle stuff is out there and not a lot breaks, ohio is a lot better then they used to be.
#10
Member
JUNIOR BUILDER
Join Date: Aug 2006
Posts: 68
crank
I second that Hammertime.I have run an Ohio Crank rotating assembly for three years with no problem.If you listen to what everyone says about something you will almost always hear of a bad deal,and if you listen to everyones bad deals you will eventually run out of products to buy.If something is half price of a big name product then automatic people think it is junk.Maybe that is right and maybe it is not.I wonder what people would think if Eagle or any of the cheaper companies raised their prices higher.Would it be better.Bottom line is if you can't afford the big name stuff then you are going to have to make a choice on which one to buy.