Results 1 to 2 of 2

Thread: looking for ideas

  1. #1
    Senior Member DYNO TECH
    Join Date
    Aug 2007
    Colebrook Connecticut

    looking for ideas

    I got a 406 and want to add additional cooling to the simesed cylinders.
    I have a pipe plug inbetween the 3&5 and 4&6 cylinders on the head .
    now where do i tap coolant off the pump?
    Ive seen cars in the past with a 406 that had the extra coolant lines plumbed to the heads in that location but cant recall where they got the source from.

  2. #2
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Some heads came with a coolant hole dead center of the intake flange (sounds like your heads), you can also get intakes (Super Victors for one) with coolant ports on all 4 corners. On my dragster I pump water in the front and exit out the back two ports on the intake. The coolant lines get plumbed from those center ports to a block at the tstat housing as a return, not pumping pressure into it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy