14 degree oval port dart heads bbc
11-05-2007, 06:37 PM
#2
Senior Member
SENIOR BUILDER
Join Date: Oct 2004
Location: Woodbridge, VA
Posts: 101
what size ports, what size valves, who ported them, .. what is the port
cross sectional area, . .
it's best to build the engine around the heads, .. but I need all the information
about the heads to help you.
Curtis
cross sectional area, . .
it's best to build the engine around the heads, .. but I need all the information
about the heads to help you.
Curtis
11-05-2007, 07:03 PM
#3
Junior Member
SHOW GUEST
Thread Starter
Join Date: Apr 2003
Posts: 6
heads
they have 2.4 int and 1.9 exht, oval ports and are cnced heads from dart is what i was told. they will be sent to engine builder to buiild around them thought. what the deal was i can get a bowtie cnc tall deck block cheap from a old boat racer that has had since new and never used block.anyway any info would be appreciated. and what about steel versus alum rods, any opinion
