engine mount
10-21-2007, 10:35 PM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Apr 2006
Posts: 3
engine mount
I am going to put a small block in an s-10 and want to move the engine farther back and lower using motor plates. But I do not know how low to mount it. Where is it best for weight transfer? Any suggestions?
10-22-2007, 04:50 AM
#2
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Re: engine mount
Originally Posted by dunn383
I am going to put a small block in an s-10 and want to move the engine farther back and lower using motor plates. But I do not know how low to mount it. Where is it best for weight transfer? Any suggestions?
In the bed. :P
10-22-2007, 02:35 PM
#3
Senior Member
EXPERT BUILDER
Join Date: Apr 2004
Posts: 279
You can use various swap mount kits available anywhere and get it to the firewall, but the height is limited. If you're crafty, use a motor plate and mount it how you see fit. Personally, if it's going to be a street/strip rig get the swap mounts, their alot less of a headache.
If you have any questions, just ask.
Here's a place that is strictly swapped S-10's. Alot of good info there.
http://www.v8s10.org/forum/index.php
If you have any questions, just ask.
Here's a place that is strictly swapped S-10's. Alot of good info there.
http://www.v8s10.org/forum/index.php
