chassis certification
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: May 2003
Location: chicago, il
Posts: 20
chassis certification
Does anyone know of a place or person in the chicagoland area that does nhra certifications? My old cage didn't pass the 8.50 cert (tubing was too thin)and now I have a new one and would like to have it cert. this winter.
#2
Junior Member
APPRENTICE
Join Date: Feb 2004
Location: Iowa
Posts: 12
http://www.nhradiv3.com/tech.html
Here is a link to Div 3. Click on the list of chassis inspectors and it should give you names.
Here is a link to Div 3. Click on the list of chassis inspectors and it should give you names.
#3
Senior Member
DYNO OPERATOR
Join Date: May 2003
Location: Moscow Mills, Mo.
Posts: 533
Mike Vehige is a good friend of mine. He lives 40 miles west of downtown St.Louis. He may be the closest to you.
Great guy, he owned and operated MAR track in Wentzville.
Tell him Vince Tosto ask you to call him.
Great guy, he owned and operated MAR track in Wentzville.
Tell him Vince Tosto ask you to call him.
#4
Junior Member
APPRENTICE
Thread Starter
Join Date: May 2003
Location: chicago, il
Posts: 20
Thanks for the replies on chassis cetifications. I was just near St. louis @ Gateway Int. Raceway about 3 weeks ago. I hate I didn't ask sooner. I also checked the div. 3's inspector lists and sent a couple of emails. Thanks again.
#5
Junior Member
SHOW GUEST
Join Date: Aug 2007
Posts: 2
I just purchased a car (on racingjunk) in Indiana and would not "seal the deal" until the chassis was certified. I contacted the division 3 tech department and I can't speak highly enough of all the individuals that responded to help me. I had not even seen the car, but one of the tech guys actually drove to the sellers house and certified the chassis and then called me to give me his thoughts on the car. The tech guy called me BEFORE the seller did. If any of you division 3 guys are reading this, Thanks a million!!