Results 1 to 7 of 7

Thread: chassis certification

  1. #1
    Junior Member APPRENTICE
    Join Date
    May 2003
    Location
    chicago, il
    Posts
    20

    chassis certification

    Does anyone know of a place or person in the chicagoland area that does nhra certifications? My old cage didn't pass the 8.50 cert (tubing was too thin)and now I have a new one and would like to have it cert. this winter.

  2. #2
    Junior Member APPRENTICE
    Join Date
    Feb 2004
    Location
    Iowa
    Posts
    12
    http://www.nhradiv3.com/tech.html
    Here is a link to Div 3. Click on the list of chassis inspectors and it should give you names.
    You can accomplish almost anything if you throw enough money at it!

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    May 2003
    Location
    Moscow Mills, Mo.
    Posts
    533
    Mike Vehige is a good friend of mine. He lives 40 miles west of downtown St.Louis. He may be the closest to you.
    Great guy, he owned and operated MAR track in Wentzville.
    Tell him Vince Tosto ask you to call him.

  4. #4
    Junior Member APPRENTICE
    Join Date
    May 2003
    Location
    chicago, il
    Posts
    20
    Thanks for the replies on chassis cetifications. I was just near St. louis @ Gateway Int. Raceway about 3 weeks ago. I hate I didn't ask sooner. I also checked the div. 3's inspector lists and sent a couple of emails. Thanks again.

  5. #5
    I just purchased a car (on racingjunk) in Indiana and would not "seal the deal" until the chassis was certified. I contacted the division 3 tech department and I can't speak highly enough of all the individuals that responded to help me. I had not even seen the car, but one of the tech guys actually drove to the sellers house and certified the chassis and then called me to give me his thoughts on the car. The tech guy called me BEFORE the seller did. If any of you division 3 guys are reading this, Thanks a million!!

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    The div 3 guy is top notch !!!
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  7. #7
    Junior Member APPRENTICE
    Join Date
    May 2003
    Location
    chicago, il
    Posts
    20
    Thanks again. I'm currently working on setting something up with David Luken on div. 3.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy