Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: My ride video

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Oct 2004
    Location
    Newport News, VA
    Posts
    139
    http://www.gdmii.com/pics/81launchvidcapsig.jpg
    1981 Camaro @ 2594 lbs.
    496 cu. in. on 1150 Rupert alky
    Brodix BB2X heads touched by the magic hands of Curtis Boggs
    [email protected] Best 60' 1.18
    www.motorsportsvillage.com

  2. #2
    Administrator RACING JUNKIE
    Join Date
    Mar 2004
    Location
    Maine,USA
    Posts
    1,208
    Thats pretty stout George,I like it
    There Is 1 Thing Better Than Cubic Inches,,,More Of Them

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Sep 2005
    Location
    ID
    Posts
    1,125
    Nice!!!!!!!

    Sounds like you got out of it early though.

  4. #4

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Oct 2004
    Location
    Newport News, VA
    Posts
    139
    Quote Originally Posted by chevguy65
    Nice!!!!!!!

    Sounds like you got out of it early though.
    Just running 1/8th mile. The scoreboard sits at the 1/4 mile mark.

    George
    http://www.gdmii.com/pics/81launchvidcapsig.jpg
    1981 Camaro @ 2594 lbs.
    496 cu. in. on 1150 Rupert alky
    Brodix BB2X heads touched by the magic hands of Curtis Boggs
    [email protected] Best 60' 1.18
    www.motorsportsvillage.com

  6. #6
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    MAN THAT THING sounded great.....what kind of 60ft you pulling ?..its leaving hard ?

    Brian
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  7. #7
    Senior Member DYNO OPERATOR
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    525
    gdmii man that was cool an 1.18 60' thats flying good job.
    Wesley
    60' 1.30
    5.58 @ 127.89

  8. #8
    Senior Member MASTER BUILDER
    Join Date
    Oct 2004
    Location
    Newport News, VA
    Posts
    139
    Brian and Wesley thanks. That particular video was of the 1.18 60 ft. I think. That was back in the early Spring. Yeah, it leaves pretty hard. I had to rebuild the motor since then and am just breaking in a new set of M/T ET Drags. Here's a couple of vids from tonight. Ran a couple of 5.49s at 125+ and 1.19 60s. 'Tain't bad for a little 496.

    http://s217.photobucket.com/albums/c...pture.0004.flv

    http://s217.photobucket.com/albums/c...pture.0005.flv

    George
    http://www.gdmii.com/pics/81launchvidcapsig.jpg
    1981 Camaro @ 2594 lbs.
    496 cu. in. on 1150 Rupert alky
    Brodix BB2X heads touched by the magic hands of Curtis Boggs
    [email protected] Best 60' 1.18
    www.motorsportsvillage.com

  9. #9
    Senior Member DYNO OPERATOR
    Join Date
    Nov 2006
    Location
    NC
    Posts
    558
    Nice I watched it a couple of times,great 60 fts.David.

  10. #10
    Administrator RACING JUNKIE
    Join Date
    Mar 2004
    Location
    Maine,USA
    Posts
    1,208
    Nice progress George,them vids are awesome,its great when you can see the little changes that really turn into alot of ET.

    I wonder what that thing is going to do once it finally cools off :P

    All I can say is I'm impressed

    Sounds like a "thumpin machine"
    There Is 1 Thing Better Than Cubic Inches,,,More Of Them


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy