Results 1 to 4 of 4

Thread: Which Ati balancer diameter.

  1. #1

    Which Ati balancer diameter.

    I have a 7" Ati balancer.When i talked with Ati they recommended their 8" balancer.It is going on a 620c.i chevy used to drag.My question is will the 7" balancer be fine.

  2. #2
    Junior Member APPRENTICE
    Join Date
    Oct 2003
    S'West Michigan
    Since no one else jumped in I'll take time. In most cases the larger the damper the better the dampening. Your 7" will be just fine. And in my opinion you've chosen the best. Nothing on my stuff except SuperDamper. Good luck

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Rutherfordton North Carolina
    The 7" will work but I would take the advice ATI gave you,as the stroke and power increase the need for more weight on the end of the crank increases to dampen the torsional vibrations from the firing pulses.your crank life wont be as long with the lighter damper.Bill
    Hendrens Racing Engines
    1310 U.S. Hwy 221 North
    Rutherfordton N.C. 28139
    828-286-0780 Bill, Steve, Mike

  4. #4
    Join Date
    Jun 2006
    The Custom Engine Shop, Indianapolis, Indiana

    ATI Damper

    Bill hit it on the head. A big three ring would be best but, you could us the one you have.
    CDR Performance
    The Custom Engine Shop and Sponsor of the First Annual YellowBullet.Com Nats

    If you have never experienced fear your car isn't fast enough.

  5. Racing Junk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy