SBC Nitrous cam
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2003
Posts: 9
SBC Nitrous cam
Who makes a good Nitrous roller cam for a 400 SBC. I have talked to Bullet but he never narrowed it down much for me. His numbers were kinda out there.I have used them for several cams but recommendation was kinda strange. Who else does a good job. I got on Cam Motions website but they want $25. to recommend a cam for me.
#3
Junior Member
APPRENTICE
Join Date: Sep 2007
Posts: 11
I like there stuff too. What specs did he suggest? I would have expected a bit more exhaust lobe and a wider lobe center than naturally asperated. Just wondering what he suggested that was "kinda out there" :? .
Thanks Tom
Thanks Tom
#4
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2003
Posts: 9
What Mark at Bullet suggested was a 273-288 @.050 on a 111 lsa. That seams like a lot of duration for only 11.5 comp.
Talked to Cam Motion today. His suggestion was a 272-279 @.050 664-645 lift on a 108 lsa. His theory was to use a tight lsa to keep the pistons cooler. I don't know I guess everyone has there own ideas and theories. I know they both make great cams NA and nitrous.
Talked to Cam Motion today. His suggestion was a 272-279 @.050 664-645 lift on a 108 lsa. His theory was to use a tight lsa to keep the pistons cooler. I don't know I guess everyone has there own ideas and theories. I know they both make great cams NA and nitrous.