SBC Nitrous cam

Old 09-06-2007, 08:59 AM
  #1  
stroked470
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2003
Posts: 9
Default SBC Nitrous cam

Who makes a good Nitrous roller cam for a 400 SBC. I have talked to Bullet but he never narrowed it down much for me. His numbers were kinda out there.I have used them for several cams but recommendation was kinda strange. Who else does a good job. I got on Cam Motions website but they want $25. to recommend a cam for me.
stroked470 is offline  
Old 09-06-2007, 11:24 AM
  #2  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
Default

I like Bullet, don't know why it didn't work for you. I have also had good luck with Isky and Lunati. Both are similar and very consistant on and off the spray.
mytmouz is offline  
Old 09-06-2007, 03:01 PM
  #3  
ThomasL
Junior Member
APPRENTICE
 
Join Date: Sep 2007
Posts: 11
Default

I like there stuff too. What specs did he suggest? I would have expected a bit more exhaust lobe and a wider lobe center than naturally asperated. Just wondering what he suggested that was "kinda out there" :? .
Thanks Tom
ThomasL is offline  
Old 09-07-2007, 02:43 PM
  #4  
stroked470
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2003
Posts: 9
Default

What Mark at Bullet suggested was a 273-288 @.050 on a 111 lsa. That seams like a lot of duration for only 11.5 comp.

Talked to Cam Motion today. His suggestion was a 272-279 @.050 664-645 lift on a 108 lsa. His theory was to use a tight lsa to keep the pistons cooler. I don't know I guess everyone has there own ideas and theories. I know they both make great cams NA and nitrous.
stroked470 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -