Intakes
#2
Senior Member
MASTER BUILDER
Join Date: Apr 2007
Location: Directly Over the Center of the Earth
Posts: 138
Good luck. Only dual quads I've heard of for the 351W are made by Price Motorsports and Edelbrock has one now too, I think. Don't know about either one fitting Yates heads.
If you are looking for a tunnel ram dual four setup you are flat out SOL. Other than an occasional one-off they just do not exist.
Ask me how I know.
Murff
If you are looking for a tunnel ram dual four setup you are flat out SOL. Other than an occasional one-off they just do not exist.
Ask me how I know.
Murff
#3
Junior Member
SHOW GUEST
Thread Starter
Join Date: Sep 2007
Posts: 2
Thanks murff,
I talked to edelbrock backin april,they didn't have anything.
Just thought somebody out there might know where one was.
I know i can get Wilson,or Hogan to build one,but don't
wan't to have to break the piggy bank just yet.
I talked to edelbrock backin april,they didn't have anything.
Just thought somebody out there might know where one was.
I know i can get Wilson,or Hogan to build one,but don't
wan't to have to break the piggy bank just yet.
#7
Senior Member
MASTER BUILDER
Join Date: Apr 2007
Location: Directly Over the Center of the Earth
Posts: 138
Originally Posted by lively
there is a group in INDIANA that makes nice adapters for lots of different ford set ups--i will try to find there name in my files---LIVELY
That's where I got my adapters for running the 289 / 302 tunnel ram on my 351W.
They also offer this:
Murff