Results 1 to 4 of 4

Thread: Joyce 69 camaro..(Mrs bjuice)

  1. #1
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239

    Joyce 69 camaro..(Mrs bjuice)

    [img][/img]

    [img][/img]

    [img]


    this is the 69 camaro i built for my wife several years ago..small block 400 (406), Dart iron eagle heads (steel). flat tappet solid roller 520 lift ( small)
    steel h beam rods, gm 400 crank, forged pistons...roller rockers, stud girdles..nothing really speacial in motor...wanted a tamer street machine for the wife. even the holley 750 dp is new out of the box..i adjusted it and bolted on....car is un- cut,,all light blinkers,horn works,26x10's on rear DOT ET STREETS ( NO SLICKS)...12 bolt rear 4.56 gear (1/8)..turbo 350 tranny...basically stock chassis except some subframe connectors,slapper bars and i turned the pinion down justs a little more than normal to get a good bite...

    last run
    footbraking, thru the mufflers,DOT street tires,in street trim the car ran 7.60 at 90 mph and a 1.56 60 ft...in the heat of day..let me say it took a few passes and the track to work in before we got the 1.56 60 ft. but it did get it...not made for a stock suspension full trim camaro at 3300lbs plus driver...

    we also use 93 octane pump gas....lol

    its s fun car with no eletronics on board except the 6al box and a line lock.
    please remember this is a lady (mother) driven with a car seat in the back..and you are subject to see her at the super market in it.......


    we realize we could do some work and change the heads and go with a more agressive camshaft and squeeze another 100-150 hp out of it ...but its sort of a mute point at this time......by the way the motor was dynoed and made a little over 480hp and about the same amount of TQ....

    my wife loves driving and i love being her pit guy...

    i am also in the background when the picture was taken by her...lol

    Brian[/img]
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    525
    Very nice ride Joyce and I know you can't wait to get behind the wheel of a vette. Well you two have fun and keep it safe.
    Wesley
    60' 1.30
    5.58 @ 127.89

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Sep 2005
    Location
    ID
    Posts
    1,125
    Gorgeous 69!!!!

    Now to get your daughter a jr dragster and start her getting ready for when she is old enough to drive it. 8)

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    EastWenatchee,WA
    Posts
    887
    brian you just have sweet ass rides, now that is a pretty car, bet the wife loves it, and weld draglites, looks sweet!!!!!!!!!! 8)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy