Results 1 to 7 of 7

Thread: world products bbc merlin heads

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044

    world products bbc merlin heads

    I bought a used set of world products merlin heads casting # 1-043b and I cant find any info on them what so ever, anybody ever heard or used these babies?
    They are cast iron rectangler intake ports and have D shaped exhaust ports the intake valves are huge and look like 230's
    Just wondering what the intake port volume might be, I got a good deal on them and plan on using them on my 13 to 1 compression 496 bbc but I'd still like to know what the specs are before I throw some money at them. Any help on the info would be appreciated.
    Thx, Charles
    ***IN GOD WE TRUST***

  2. #2
    That # looks very familiar. If my memery serves me right those are the same set of heads that i had awile ago. They are the early Merlin VR 345 cc intake runner.
    http://i76.photobucket.com/albums/j4...a/c9e78afe.jpg
    522ci 1110HP 1803* Dukes, cast intake,1250 on gas. Heads By CBOGGS
    www.raceflowdevelopment.com

  3. #3
    Member MASTER JOURNEYMAN
    Join Date
    Feb 2004
    Posts
    39
    i run a set of those heads on my 468 2.250 intake and 1.880s they are very good with a little work i run [email protected] lbs on 12.5 comp 468

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    you know running a 13:1 comp you should think about using
    aluminum, you'll need all the coolness you can get with that
    high of compression, i was running 10:75 to 1 and ran hot
    with iron heads, purchased aluminum and it fixed the problem
    just letting you know the problem i had, good luck

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044
    well I was wanting aluminum but my budget just couldn't bare it right now, maybe in the future I can upgrade. These are some awesome heads. I had them checked out by a local machine shop they have the 230 intakes valves, 1.88 exhaust. 345 cc intake runners, 1.625 springs, manley titainum retainers and they also came with J & D machine shaft mount roller rockers. I got everything for 750 dollars plus shipping, so I got a great deal. I'm getting them decked and having a them cut the o ring grooves alittle deeper and a vavle job while their at it. I dont think I'l be having a cooling problem I got big aluminum radiator, and I'm only gonna be running a short 1/ 8 mile track no street use at all. My friend has some similar world bbc heads except they are the grumpy jenkins version and he has same exact set up as me a 13 to 1 pistons in a 496 and his has never run hot, in fact we have a hard time getting it to warm up on a cool night. after burn out and running down the track in this 100 degree heat its only 180 to 190 at the end of the track.
    Thx for the replies, Charles
    ***IN GOD WE TRUST***

  6. #6
    When i had those on. It was a 476ci 14.8 -1 motor. 835hp. Had ALOT of work done on them. Being the block was .100 over. At the end of my pass which was usauly 15-20sec. it was at 180-195.
    http://i76.photobucket.com/albums/j4...a/c9e78afe.jpg
    522ci 1110HP 1803* Dukes, cast intake,1250 on gas. Heads By CBOGGS
    www.raceflowdevelopment.com

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Aug 2003
    Location
    Big Lake, Minnesota
    Posts
    162

    Re: world products bbc merlin heads

    Quote Originally Posted by cepx111
    I bought a used set of world products merlin heads casting # 1-043b and I cant find any info on them what so ever, anybody ever heard or used these babies?
    They are cast iron rectangler intake ports and have D shaped exhaust ports the intake valves are huge and look like 230's
    Just wondering what the intake port volume might be, I got a good deal on them and plan on using them on my 13 to 1 compression 496 bbc but I'd still like to know what the specs are before I throw some money at them. Any help on the info would be appreciated.
    Thx, Charles
    I had the 1-043c which are the 310cc and had 2.300, and the 1-043b are 345cc runners but I am not sure of the valve sizes. I called World and they gave me my specs for my heads. Give them a call. They should work pretty good on your 496. Good luck.

  8. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy