Results 1 to 3 of 3

Thread: valve lash

  1. #1
    Member MASTER JOURNEYMAN
    Join Date
    Apr 2003
    Location
    Fenton MI
    Posts
    38

    valve lash

    When setting valve lash, what is the best way to spin the motor to open and close the valves? Is there something you can do other than clicking the ignition?

    Thank you
    Adam

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Dec 2003
    Posts
    185
    You can pull the plugs out and turn it over with a long handle 1/2 ratchet using the damper bolt........

    If you don't have one you can put a starter button on the firewall where you can reach it from eather side or just put 2 on (one on each side) and bump it over to check your lash...I think this is how most do it..Good luck

  3. #3
    Member MASTER JOURNEYMAN
    Join Date
    Apr 2003
    Location
    Fenton MI
    Posts
    38
    thanks
    Adam


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy