Results 1 to 3 of 3

Thread: motorhome help

  1. #1

    motorhome help

    I know this is not a motorhome forum, but I need help! I have a 2001 Georgetown with a Workhorse Chassis. It has the autopark system. It is a hydralic cylinder with about 5 sensors and some type of brake on the driveshaft. The auto park light came on, but it did not engage the brake. I drove it a little bit, and it locked the brake. I checked all the connections and it released. Now, the brake will not engage at park(just like it is in neutral). One of the sensors is leaking through the sensor, I think this was the original problem. It seems this brake automatically locks and unlocks when the pump applies pressure. It is now leaking so much it engages after about 45 minutes of driving, although it will not stop the motorhome. I am in Tennessee and it is Saturday night. I was supposed to be back in Florida tomorrow. Is there a way to disable the brake? will this screw up anything? There is a worhorse repair place in town( recommended by Camping World and on the workhorse web site) Any suggestions would be greatly appreciated. What a vacation!

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Go to and go to the tech section. Post a topic aimed at Steve Oldani aka Transman. I believe he runs a service department for a large RV dealer. He is always glad to help anyone.

  3. #3
    Junior Member APPRENTICE
    Join Date
    Feb 2004
    Here is a link to his website.
    You can accomplish almost anything if you throw enough money at it!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy