Results 1 to 2 of 2

Thread: painting graphics

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Dec 2002
    Location
    spring creek nv.
    Posts
    328

    painting graphics

    i have a 06 chevy hhr that i want to do flames or something on the front end to add some flash to it..what is the right way to prep and paint over the factory paint..

  2. #2
    Member JUNIOR BUILDER
    Join Date
    Mar 2006
    Location
    Illinois
    Posts
    96
    I prefer to sand the whole panel rather than leave a clear edge around the graphics, unless you plan on a pin stripe around it. You can use a gray scotch brite, or 600 wet or dry with soap and water, followed with a paint prep solvent wiped with a lint free towel. Tack and paint. Clear whole panel after. the clear will cover any 600 scratches.

    If it's not dull, it's not ready to paint. The shine will come back with the clear.
    The older I get the less i know for sure Dennis


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy