WHAT SIZE CARB

Old 07-25-2007, 04:14 PM
  #1  
garyb69z
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2003
Posts: 9
Default WHAT SIZE CARB

ITS A 408 CU.IN. SBC,11.5-1 COMP.SET OF 200cc ALUMINUM HEADS WITH SOME WORK DONE TO THEM,SOLID FLAT TAPPET CAM WITH .560 IN. AND .585 EX. DUR. AT .050 IS 246 IN AND 254 EX. PROFESSIONAL
PRODUCT HURRICANE SINGLE PLANE INTAKE,CAR IS AUTO WITH 3200 STALL CONV. 4.11 GEARS SHIFTING ABOUT 65-6700 RPM.CAR WEIGHS ABOUT 3500LBS AND WILL BE STREET DRIVEN ,ONCE AN AWHILE TRIP TO THE TRACK. THANKS FOR YOUR HELP GUYS
garyb69z is offline  
Old 07-25-2007, 06:14 PM
  #2  
scuncio
Junior Member
SHOW GUEST
 
Join Date: Dec 2003
Location: New Hampshire
Posts: 8
Default

Will you be spraying this ??
scuncio is offline  
Old 07-25-2007, 07:18 PM
  #3  
stevehgs
Junior Member
JOURNEYMAN
 
Join Date: Nov 2006
Posts: 28
Default

Very close to my combo but I have a little bit more cam and it's in a 2700# S10 pick-up. I just bought one of Holleys new 750 cfm Steet HP's. Awesome little carb, very responsive. Being a double pumper yours might suffer a bit with the extra weight. Depends on how tight your converter is also. What are you using now? Steve.
stevehgs is offline  
Old 07-26-2007, 01:58 PM
  #4  
garyb69z
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2003
Posts: 9
Default

NO SPRAY,MAYBE SOME HAIR SPRAY THOUGH,THIS IS A NEW COMBO SO I AM READY TO BUY A CARB.
garyb69z is offline  
Old 07-26-2007, 02:06 PM
  #5  
topsportsman1
Administrator
RACING JUNKIE
 
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,204
Default

That engine would require about 900 CFM Carburator
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
topsportsman1 is offline  
Old 07-26-2007, 05:07 PM
  #6  
scuncio
Junior Member
SHOW GUEST
 
Join Date: Dec 2003
Location: New Hampshire
Posts: 8
Default

I would think a nicely worked 800 would do the trick
scuncio is offline  
Old 07-26-2007, 06:02 PM
  #7  
SST4530
Senior Member
DYNO TECH
 
Join Date: Feb 2004
Location: Leonard, Texas
Posts: 414
Default

Very close to my engine before last update. If setup properly should be about a 7.50 to 7.80 car in the 1/8. I agree with everyone else, 750 to 850. However I think a double pump is fine if you no how to adjust the pump cams, nozzles and jet it properly.
SST4530 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -