which scat crank
#1
Member
CRAFTSMAN
Thread Starter
Join Date: Apr 2006
Posts: 62
which scat crank
hi guy's, can anyone help me find out which scat crank this is,
numbers on crank are; 350375543 and 0506086.
i've tried emailing scat but on response.
i get it's a 383 by 350 and 375 stroke, do the other numbers say what material it is etc.
numbers on crank are; 350375543 and 0506086.
i've tried emailing scat but on response.
i get it's a 383 by 350 and 375 stroke, do the other numbers say what material it is etc.
#4
Member
CRAFTSMAN
Thread Starter
Join Date: Apr 2006
Posts: 62
double checked the numbers that's them, the crank itself has lightning holes in all throws only 1-4 holes go right through, flywheel flange is not like the std gm with 2 90* cutouts more roundish looking, and it has a smooth casting texture to it.
just want to make sure it's not cast crank as i 'll be looking at trying to get over 650 hp from this combo.
just want to make sure it's not cast crank as i 'll be looking at trying to get over 650 hp from this combo.
#5
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
i did a google searh and it turned out to be a elgin 4340 steel crank w/ 3.75 stroke with drilled lighting holes. Are you sure its a scat?
? here's the link:
http://cgi.ebay.com/ebaymotors/New-E...8527QQtcZphoto
? here's the link:
http://cgi.ebay.com/ebaymotors/New-E...8527QQtcZphoto
#7
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Generally speaking most 4340 steel cranks are pretty stout some are better than others the difference in quality typical means allot higher price, I would have to say that it should handling 700 horse no problem.
Just make sure you get it checked out throughly by a competent machine shop, and then have it balanced for your piston & rod combo.
Goodluck Charles
Just make sure you get it checked out throughly by a competent machine shop, and then have it balanced for your piston & rod combo.
Goodluck Charles