Results 1 to 3 of 3

Thread: Nitrous question

  1. #1

    Nitrous question

    My friend has a ford 302 with a dual quad intake with two edelbrocks 500's He just picked up a nitrosu system and was wondering if he could run the single plate system on it. I told him i didnt think so becasue it would be uneven. Or am i wrong? Thanks

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Oct 2006
    I believe you are right. I wouldn't do it.

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    If you are talking about only placing one nitrous plate under one carb when you have two carbs? Don;t do it.

    If you are talking about using one single plate system with one bottle and only one solenoid for nitrous and one solenoid for fuel but plumbed in to two plates? Go for it. I do it and I like it.

    Only problem is the total nitrous power adding capability will be cut in akmost half. So if you have a 300 hp system and install it on two plates with solenoids for one system, you will end up with near 75 hp or a little higher on each plate for a total of 150 hp or in other words a halving of the sum total.

    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Copyright © 2005-2016 All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy