trans safety
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
trans safety
need a flex plate shield and a tranny sheild or blanket for turbo 350, do any of you have suggestions to as brands, space is tight in s10 , but must get these two things to be legal, any good ideas
#2
We use tha CSR fiber shield it's all in one and fits really close.
http://www.jegs.com/webapp/wcs/store...10002_44680_-1
Curtis
http://www.jegs.com/webapp/wcs/store...10002_44680_-1
Curtis
#3
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
http://store.summitracing.com/partde...5&autoview=sku just ordered this flexplate shield, hopefully will fit in there, will get a blanket from tci and will be done
#4
Member
JUNIOR BUILDER
Join Date: Jan 2004
Location: Wisconsin
Posts: 65
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
#5
Senior Member
MASTER BUILDER
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
drz1972ss wrote:
The JW ultrabell is for protection of the flexplate area, but it still requires the blanket or transmission shield for the planetaries.
Bill M
By the time you buy a shield and blanket. You can but a JW bell for about the same $$$ No worries of a blanket getting the trans hot, or coming undone. Also hard to see any leaks from the trans. Most of all no clearence problems.
Bill M