Water to use?

Old 05-07-2007, 05:36 AM
  #1  
jjam
Member
CRAFTSMAN
Thread Starter
 
Join Date: Apr 2003
Posts: 56
Default Water to use?

I'm using Distilled water in my aluminum block/headed engine. I was told if I can get some Deionized water this would be better. Is this true? To help aid against corrosion? And keep coolant system clean?
jjam is offline  
Old 05-07-2007, 05:56 AM
  #2  
topsportsman1
Administrator
RACING JUNKIE
 
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,204
Default

You need to check the coolant with litmus paper

That checks the acidity or PH of the coolant,you need to be in the 7.0 range,thats neutral

Local parts stores may be able to help you there.

I know caterpilar has a solution that you pour into the coolant system and also has the litmus paper to test coolant systems.
That additive also helps with corrosion and keeps the cooling system happy

http://en.wikipedia.org/wiki/Litmus_paper
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
topsportsman1 is offline  
Old 05-07-2007, 05:57 AM
  #3  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
Default

I would say it is true as we have to use deionized water in some of the equipment where i work. I will say that after working there 4 years, the inside of the cooling units is almost as clean as the day it was installed. Other places i've worked that had not used the Deionized water have had to use a descaler and flush the system every 3 years or so. Hope this helps.
mytmouz is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -