SBC how much cam can I get in 9.25 deck block with 4 inch stroke 6 inch rod
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Aug 2007
Posts: 1
SBC how much cam can I get in 9.25 deck block with 4 inch stroke 6 inch rod
I'm building a 440 cubic SBC and it has a 4.00 stroke 6.00 rods 4.185 bore I run a .900 base Circle solid roller cam and would like to get 850 to 900 lift just wondering if it will fit in my combination without hitting connecting rods thank you
#2
You can look at the Callies Ultra offset rod to help. Also consider the lobe you will need to get .900" lift. You will probably have to have a bbc journal cam I believe to get that much lift in the block even with 1.7 rockers. At .900" with 1.7 rockers it is a .529 lobe.
#3
Senior Member
MASTER BUILDER
Join Date: Mar 2014
Posts: 244
I have a 50 MM camshaft that is .850" with 1.8 rocker ratio.
It was in a 9.325" block and raised cam.
It had a 4.125" stroke crankshaft and 6.125" Callies Ultra rods.
Also have a timing cover and timing chain set to go with it.
[email protected]
It was in a 9.325" block and raised cam.
It had a 4.125" stroke crankshaft and 6.125" Callies Ultra rods.
Also have a timing cover and timing chain set to go with it.
[email protected]