dkguy

Hi Everyone,
I have an older thumb-wheel Dedenbear Crossover Delay box that has four wires (power,ground,push-button, transbrake). Last night getting the car ready I pressed the transbrake button, which applies the power to the trans-brake solenoid. After releasing the button and waiting for the delay to count down the delay box didn't release the trans-brake. You could still see the light showing power still applied to the trans-brake solenoid. The only way the delay box would release power to the trans-brake was to cut power to the delay box and then turn it back on. Does this sound like an internal delay box problem or should I look somewhere else. Thanks.