Brake problem
Ok, I know it sounds pretty elementary , Brakes on an old don hardy chromoly chassis, frame mounted master , Lamb calipers, front, Willwood rears.
Car had a problem with locking up, when down at the end of 1/4 m.
We found the master had some crud in it, as it was under the car and close to the ground it picked up a bit of dirt, kida rusted up a portion of the inner bore of the master.
I replaced with the matching part, same situation, except the brake rod is returning all the way back but there is still brake pressure in the system.
I figured, possibly line lock, eliminated that issues, problem still persists.
Bled the darn thing 20 times, still no luck.
Anybody?