Thread: ladder bar help
View Single Post
Old 01-03-2010, 11:28 AM
  #4  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

My car is a ladder bar car,it has the round crossmember. It is pretty low but not anywhere near 5 inches low I don't think.My car also has the 2x3 rear frame. I would want to start out with the bar level to the ground while in the middle hole. Level to the ground is usually where they work good at so if you are level and in the middle hole you will have adjustment either way. JMO I bought my car as a roller from an old guy and it has always worked well so no real experience tuning it.
Tod74 is offline