Old 05-02-2012, 03:07 PM
Junior Member
Join Date: May 2010
Posts: 10
Default 1055 rons terminator problems HELP please

i have a 408 sbc with the 1055 just put it on over the winter and not right since. hard to start. missing half track. and even if i get it to stop missing still hard to start. started out with a 1/2 pump and even tried a 0 pump still nothing rons told me to start out with 90 return and 33 jets . but i have been up and down on both and still cant figure it out. the exhaust temp will not give me a good ready for some reason it is reading like 1500 degrees which is not right even took the terminator off and put a alch carb on it and still 1500 degrees i have tried almost everything please any infomation[/b]
smiley2947 is offline