flat tapet cam
I run a 5500 PTC converter and it would stall every bit of it.
The car ran 6.26 at Holly Springs when it was a 620 ft strip on gas with brodix track 1's and an 850 carb. and 6.20 gears. It ran 6.61 @ memphis on gas with the same 406" junk motor, i mean speed pro pistons and stock pink rods, with a torquer manifold. I broke a rod bolt and retired the motor. The motor is going back together with good parts in my Pro Street 1998 Sonoma stepside, with a 4,000 stall and 4.88 gears. I expect it will run mid 10's with mufflers because the truck is 600 lbs lighter and wil be streetable, My Malibu is 3250lbs. I'll fill up at Sonic with unsweet tea and drive to the track 30 miles away. I know it will do it because it's about 600HP with this setup.
Zip.