View Single Post
Old 01-06-2008, 07:11 PM
Senior Member
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658

Originally Posted by olds48
Pulled the valvebody out and checked the valves today.Everything looked okay,went ahead and cleaned everything up,but none of the valves seemed to be sticking at all.The tranny doesn't slip at all,so I hate to tear it down to air check the clutches.Maybe I'll run a pressure test and see what my line pressure is before I yank it out.
Make sure all the check balls are where they're supposed to be, and that one doesn't have a flat spot on it.
OneBadGMC is offline