thanks bill
im hoping it,s a decent trans. it has a 12.7/8 long input shaft so i was told it's a 1.76 but im not sure . there is a tci manual valebody in it as well as some other odds and ends like all the shifting levers and parking pawl are all tci. how do i know if it has a turbo bushing in it.the turbo shafts fits with a little play around bushing. i also looked at the servo and it is a single ring servo.it has a 30spline turbo shaft for sure. i just want it to hold up to street strip with about 600hp and in a s-10 with 4.88 gear. well any help is greatful thank you