Originally Posted by bbchevy
Originally Posted by wmeabates
For anyone that's never used a plug that must be indexed so the piston does not hit it,be sure the motor is not at tdc,90,180,or 270 degrees befor you put them in or take them out.The strap might hit the pistons that are at the top when you turn the plug.Bill.
Bill,
THAT is EXCELLANT INFO!Because Screwing the Plug in,if the Piston is in the Wrong Area,could Cause a Severe GAP LOSS!
Also Wanted to Say the Max is Getting CONFUSED w/Extended Tip,and Reach.
Later
G 8)
X3! excellent info! have never tried anything other than the standard plug so i have no idea how much room i have.
reach= length from tapered seat to base of threads
extended tip= ground strap and center electrode protrude into chamber further from base of threads