BG 400
ok guys just got my gasket kit in from Cliff...thanks cliff GREAT SERVICE.
ok this is the 1st gasket kit i have installed in one of these pumps and although i am 99.9% i got every gasket installed,i want to be sure,so i wanted to throw this around a little to make sure i haven't missed anything...
the only o-rings i saw that could be replaced was the bottom plate larger o-ring...and the inner shaft o-ring that you have to press into the shaft cavity beneth the rotor/blades and plate......
is there anything else i should be on the look out for on this pump now that i have it on the bench....
the kit i got had the 2 gaskets mentioned above plus 2 more o-ring gaskets a little smaller then the base o-ring gasket on the pump base plate.
Cliff said this kit would also fit a magnafuel pump as well ..maybe the extra 2 o-rings is for the magnafuel pump... i don't know i never had to replace any gaskets on the maganfuel pump .....but i didn't see anyplace else for a gasket to be placed on the BG 400
any stories ,feedback etc.......
by the way i can't stand BG pumps...have i said that already..lol.. :shock:
Brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "